Description

You will be a CNC Machine Operator for our Archbald team, responsible for setting up and operating computer numerical controlled machining centers to produce mid to high complexity parts.

What You Will Be Doing

As a CNC Machine Operator, your responsibilities will include, but are not limited to:

• Set up and operation of one or more CNC machining centers for both horizontal and vertical machines for mid to high complexity parts. Perform drilling, milling, boring, & tapping, etc. on any and all types of work within the scope of the machine
• Selects and installs proper cutting tools, and zeroes in the machine to control. Shapes and installs proper cutting tools, select proper tool offsets to meet quality standards and make other necessary setup adjustments
• Selects and loads proper CNC program in machine control to insure proper operation
• Follows instructions to machine, fabricate, or assemble parts to print and operation sheet specifications using conventional and CNC machines
• Interprets CAD data, prints and sketches with regard to fabrication and follow written/verbal instructions
• Performs secondary operations during the machine cycle such as deburring and straightening
• Inspects parts as they are produced using standard gages, micrometers, indicators, vernier calipers, depth gages, and other measuring devices, to ensure conformity to specifications
• Inspects cutting tools for wear to ensure the quality of parts and makes adjustments during production run as required to maintain quality parts and keep the machine running
• Maintains coolant levels to ensure a steady supply of coolant/cutting fluids to the machine
• Receives and provides cross-training for other tasks related to department functions and procedures
• Recommends and executes changes to achieve process improvements and/or cycle time reductions
• Inspects set up parts prior to submission to inspection for approval to the fullest and most practical extent possible
• Provides feedback on prescribed processes, fixturing, and tooling to Manufacturing Engineers to ensure that off-line engineering is complete and optimize efficiency before online operations are performed
• Analyzes machining results and performance targets with budgeted times and communicates shift targets for jobs to be run in production
• Investigates “out of specification” problems in machining processes and work with ME’s and programmers to resolve
• Provides technical support to Manufacturing personnel
• Verifies gages and inspection equipment required are correct and appropriate
• Verifies NC code during execution of setup
• Pre-sets and installs proper cutting tools select proper speeds, feeds, and depth of cut to maintain the proper quantity and quality standards
• Edits CNC programs
• Adheres to safety guidelines and the correct procedures for performing tasks to prevent personal injury or damage to product and/or equipment
• Performs minor preventive maintenance to equipment
• Performs other job-related duties as required by management

Why Join Us

You're a skilled and detail-oriented professional with experience in CNC machining. As a CNC Machinist, you'll have the opportunity to work on challenging projects, collaborate with a talented team, and contribute to delivering high-quality products.

We are committed to supporting your work-life balance and overall well-being. Learn more about Lockheed Martin’s comprehensive benefits package here.

Further Information About This Opportunity:

This position is in Archbald. Discover more about our Archbald, Pennsylvania location.

MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access.

Basic Qualifications

• 5 years, or equivalent experience/combined education, with additional specialized training in specific aspects of job functions and with demonstrated ability to meet production time standards with minimal defects
• Demonstrated experience in setup of lathe and milling machines
• Proficient in use of Measuring Equipment and able to verify conformance of machined work piece to specifications
• Proficient in reading and understanding complex mechanical blueprints
• Experience in selection and installation of proper cutting tools, and zeroing the machine to control. Experience in shaping and installing proper cutting tools and selecting proper tool offsets to meet quality standards and make other necessary setup adjustments
• Working knowledge M & G code to be able to program, edit & trouble shoot CNC program at machine
• Working knowledge of GD&T
• Experience working/machining steel, aluminum and stainless steel with knowledge of machining speeds and feeds required
• Experience working successfully in a team environment
• Good oral and written communication skills
• U.S. citizenship is required, as this position is located at a facility that requires special access

Desired Skills

• Experience in the development of, or redesign of, tooling and fixtures to improve quality or reduce costs
• Excellent knowledge of tooling and cutting condition calculations; know proper use and selection of different inserts, cutting tools and cutting tool geometries
• Excellent knowledge and application of GD&T
• Experience programming with GibbsCAM
• Experience with Solid Modeling
• Ability to perform complex calculations related to machining
• Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, Apriso, Microsoft Office
• Demonstrated experience in mentoring/teaching of junior machinists

Clearance Level: None

Other Important Information You Should Know

Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.

Ability to Work Remotely: Full-time Remote Telework: The employee selected for this position will work remotely full time at a location other than a Lockheed Martin designated office/job site. Employees may travel to a Lockheed Martin office for periodic meetings.

Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

Schedule for this Position: 4x10 hour day, 3 days off per week

The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $30.65 - $38.24. For states not referenced above, the salary range for this position will reflect the candidate’s final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.

Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.

(Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.

This position is incentive plan eligible.

.

Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.

Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.

As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.

Experience Level: Hourly/Non-Exempt

Business Unit: MISSILES AND FIRE CONTROL

Relocation Available: Possible

Career Area: Manufacturing

Type: Full-Time

Shift: Second