Carpenter Laborer

Job Title: Carpenter Laborer ($30/HR)

Job Description

This role focuses on commercial interior construction, including metal stud framing, drywall installation and finishing, and acoustical ceiling systems. You will work from construction drawings to install framing, drywall, RF foil, insulation, and acoustical ceilings in accordance with project specifications, while maintaining high quality and safety standards on active commercial job sites.

Responsibilities

• Install 16-gauge cold-formed metal framing in accordance with project specifications and construction drawings.
• Hang, tape, mud, and finish drywall to achieve the required finish levels and a high-quality appearance.
• Install RF foil and related insulation or barrier systems as specified in project documentation.
• Install acoustical ceiling tile (ACT) grid systems and ceiling tiles to meet design and performance requirements.
• Read and interpret blueprints, shop drawings, and project layouts to plan and execute work accurately.
• Measure, cut, and fit materials precisely to maintain quality standards and minimize waste.
• Operate hand tools, power tools, and construction equipment safely and efficiently.
• Work from ladders, scaffolds, and other elevated platforms to complete overhead and high-level tasks.
• Lift, carry, and position materials and equipment as needed to support daily construction activities.
• Follow site safety procedures and use required personal protective equipment (PPE) at all times.
• Collaborate with other trades and team members to coordinate work and meet project schedules.
• Maintain a clean and organized work area and handle materials and tools responsibly.

Essential Skills

• Experience with commercial metal stud framing and drywall installation.
• Knowledge of drywall finishing techniques and industry standards, including hanging, taping, mudding, and finishing.
• Experience installing acoustical ceiling systems (ACT), including grid and tile.
• Ability to read and interpret construction drawings, blueprints, and specifications.
• Proficiency with construction hand tools and power tools used in framing, drywall, and ceiling installation.
• Ability to lift materials, work from ladders and scaffolds, and perform physically demanding tasks such as frequent standing, bending, climbing, and overhead work.
• Strong attention to detail and commitment to meeting quality and safety requirements.
• Reliability in adhering to an early-morning construction schedule.

Additional Skills & Qualifications

• Previous experience on commercial construction job sites.
• Familiarity with RF foil installation and related insulation or barrier systems.
• Ability to work both indoors and outdoors depending on project phase.
• Comfort using personal protective equipment (PPE) consistently.
• Strong teamwork and communication skills to coordinate with other trades.
• Ability to adapt to changing tasks and project requirements over the course of a project.

Why Work Here?

You will join a professional commercial construction environment that offers steady, full-time hours and the opportunity to work on high-profile projects. The role provides a clear path for strong performers to extend their employment beyond the initial project and transition to additional sites under a contract-to-hire arrangement. You can develop and refine your carpentry and interior construction skills while working alongside experienced tradespeople in a safety-focused, team-oriented setting.

Work Environment

This position is based on a commercial construction job site in Arlington, VA, with a schedule of 6:00 a.m. to 2:00 p.m., Monday through Friday. The project is expected to run through September, with the possibility of longer-term work and transition to other sites for high-performing employees. You will work in active commercial environments that may involve both indoor and outdoor conditions depending on the project phase. The role requires frequent standing, lifting, bending, climbing, and overhead work, often from ladders or scaffolds. You will use construction hand tools, power tools, and other equipment regularly and must wear required personal protective equipment (PPE) at all times to ensure a safe job site.

We reserve the right to pay above or below the posted wage based on factors unrelated to sex, race, or any other protected classification.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. This temporary role may be eligible for the following:

• Medical, Dental & Vision
• 401(k)/Roth
• Basic/Supplemental Life & AD&D
• Short and long-term disability
• HSA & DCFSA
• Transportation benefits
• Employee Assistance Program
• Company Paid Time off or State Sick Leave

Job Type & Location

This is a Contract position based out of Washington, DC.

Pay and Benefits

The pay range for this position is $30.00 - $30.00/hr.

Eligibility requirements apply to some benefits and may depend on your job

classification and length of employment. Benefits are subject to change and may be

subject to specific elections, plan, or program terms. If eligible, the benefits

available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

Workplace Type

This is a fully onsite position in Washington,DC.

Application Deadline

This position is anticipated to close on Jul 24, 2026.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.