Distribution System Planning Engineer Associate - Senior

Job Posting End Date

07-31-2026

Please note the job posting will close on the day before the posting end date.

Job Summary

Responsible to the assigned supervisor for performing complex engineering work activities and projects requiring the application of engineering knowledge in a safe, effective, efficient and economic accomplishment of assigned objectives.

Job Description

Distribution System Planning Job Description:

• Develop and present annual load forecast and ten-year capacity plan.      
• Conduct impact studies for new customer loads and distributed generation interconnections.
• Develop models and perform system impact studies to evaluate Distributed Energy Resources (DERs) connecting to the distribution network.
• Prepare long range planning studies that consider land use development, reliability enhancement, capacity constraints and overall system optimization for operations and voltage control.
• Provide overcurrent protection studies and recommendations at the distribution breaker/circuit level.
• Build system models and determine limiting capacity factors for transformers, cables, breakers and other system elements.
• Develop Improvement Requisitions following the Project Life Cycle Management Process (PLMP) to meet budget targets and customer requirements.
• Assist in annual budget preparation, operational support issues and special studies as required.

What You'll Do:

Essential Job Functions:

• Technical Expertise: Exhibits journey level proficiency plus advanced knowledge that enables the engineer to serve as a leader within the assigned organization. Keeps abreast of new products, developments, technologies, procedures and equipment. Understands and analyzes interrelationships between systems and component equipment. Interprets codes and regulations and develops standards relevant to the area of assignment.
• Leadership & Guidance: Provides guidance and exercises judgment and discretion in providing guidance and direction to other Engineers. Leads, facilitates and coordinates work activities of others within the work group, team, department, corporate entity, or those external to the company as required to perform all routine engineering work. Ensures all work activities are performed in accordance with the policies, practices, standards and rules of the company and complies with the regulations and procedures required by external agencies. Promotes engineering professionalism and standards. Coordinates and conducts training sessions.
• Planning & Organization Ability: Participates in the development of plans by establishing measurable goals, objectives and requirements for specific areas of responsibility. Coordinates the development of input necessary to establish projected cost of all projects. Is proficient in use of scheduling techniques (CPM, PERT, flow charts, etc.) for budget and planning activities. Identifies and initiates appropriate corrective action when objectives are not met.
• Problem Solving & Initiative: Identifies, clarifies, resolves, and initiates solutions to routine and/or complex problems that sometimes involve analysis of inadequate or conflicting data. Demonstrates the ability to divide problems into component steps. Consistently looks for and develops opportunities and presents new ideas and approaches.
• Communication: Coordinates the work of other engineers in an efficient and effective manner. Develops, reviews or prepares reports on complex technical subjects clearly, concisely and effectively, in a manner suitable for presentation to management. Professional societies, regulatory bodies, etc. Leads and facilitates meetings effectively. Interpersonal Skills: Possess collaborative and consensus building skills. Functions as a team leader and member. Networks upward and downward in several disciplines inside and outside the AEP system. Leverages network to get things done.
• Decision Making: Makes decisions affecting plans and goals based on analysis of uncertain input and outcomes. Uses diverse approaches to make decisions in the absence of a definite framework or where few precedents exist. Can handle conflicting interests related to approaches on projects or studies. Analyzes options and risks and possesses the experience and knowledge to assess the risk of decisions and act accordingly. Makes decisions that affect the operations or results of the department and may have some impact on a major project.
• Business Awareness & Characteristics: Exhibits an awareness of AEP's competitive position and how business decisions impact their organizational unit. Understands the specific goals and objectives of their individual organizational unit and is proficient in establishing measurable goals and objectives. Effectively manages project budgets using cost management techniques and understands how their decisions and recommendations impact AEP's expenses and revenues. Demonstrates an awareness of profit incentives, optimizing growth of customers' businesses and using our services to attract new business.

What We're Looking For:

Engineer Associate SG6

• This is an entry level position for new graduates with a bachelor’s degree in engineering in a program accredited by ABET*; Passing the Fundamentals of Engineering examination in preparation for future licensing as a Professional Engineer (PE) is encouraged and preferred.
• Individuals with a bachelor’s degree in engineering technology can satisfy this degree requirement, if they obtain a certified Professional Engineering (PE) license. 

Engineer SG7

• Has typically acquired a bachelor’s degree in engineering in a program accredited by ABET* along with two or more years of related engineering experience.
• Individuals with a master’s degree in engineering from an engineering program accredited by ABET* may be considered for entry into the organization at this level.
• Individuals with a bachelor’s degree in engineering technology can satisfy this degree requirement, if they obtain a certified Professional Engineering (PE) license. 

*ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.

Acceptable alternative:

• Bachelor's degree in engineering (non-ABET) plus a master’s degree or PhD in engineering from a university with an ABET accredited bachelor’s program.

• Individuals with a bachelor’s degree and 2 years of DMS/EMS/SCADA experience may be considered for entry into the organization at this level.

Engineer Senior SG8

• Has typically acquired 4 or more years of related engineering experience along with a bachelor’s degree in engineering in a program accredited by ABET*.
• Or 2 years of related engineering experience along with a master’s degree or PhD in engineering from a program accredited by ABET*.
• Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico** is encouraged and preferred.

*ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology.

• Individuals with a bachelor’s degree in engineering technology can satisfy this degree requirement, if they obtain a certified Professional Engineering (PE) license. 

Acceptable alternative:

• Bachelor's degree in engineering (non-ABET) plus a master’s degree or PhD in engineering from a university with an ABET accredited bachelor’s program. ** Confirmation is required to ensure the PE obtained in Puerto Rico aligns with NCEES standards.

**VP or above may waive the requirement for a degree from a university with a non-ABET accredited program

In addition:

Electrical Engineering degrees are preferred for this role.

Where you’ll work:

This role sits on site in New Albany, Ohio

What you’ll get:

Engineer Associate SG6($84,000-$90,000)

Engineer SG7($89,000-$110,000)

Engineer Senior SG8($110,000-$129,000)

Where Putting the Customer First Powers Everything We Do

At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!

American Electric Power (On-Site)

$84K- $129K / Year  

#LI-Onsite

#AEPCareers

#Engineer

#earlycareer

Compensation Data

Compensation Grade:

SP20-006

Compensation Range:

$74,551.00 - $128,688.00

The Physical Demand Level for this job is: S – Sedentary Work: Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met.  

Hear about it first!   Get job alerts by email.  Log in to your Candidate Home Account today!  If you don't have an account, you can create one.

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.